Perri's Retro Hooteananny guitar straps come in a variety of retro, iconic, and hootenanny themed patterns. The multicoloured weave on each strap adds to the beauty and versatility.  2” Multi Color Retro Hootenanny Poly with Leather Ends. Adjustable length 39” to 58”.

Read more less

Perri's Retro Hooteananny guitar straps come in a variety of retro, iconic, and hootenanny themed patterns. The multicoloured weave on each strap adds to the beauty and versatility. 2” Yellow / Red Retro Hootenanny Poly Strap with Leather Ends. Adjustable length 39” to 58".  

Read more less

Perri's Retro Hooteananny guitar straps come in a variety of retro, iconic, and hootenanny themed patterns. The multicoloured weave on each strap adds to the beauty and versatility. 2” Blue Retro Hootenanny Poly Strap with Leather Ends. Adjustable length 39” to 58".  

Read more less

Perri's Retro Hooteananny guitar straps come in a variety of retro, iconic, and hootenanny themed patterns. The multicoloured weave on each strap adds to the beauty and versatility. 2” Yellow / Brown Retro Hootenanny Polyguitar Strap with Leather Ends. Adjustable length 39” to 58”.  

Read more less

2” David Bollt design heat transfered on Polyester Webbing Guitar Strap. Adjustable length 39” to 58”.

Read more less

These Official Licensing Pink Floyd The Wall Direct To Leather (DTL) guitar straps are 2.5 inch wide with an adjustable length of 52 to 59 inches. Perri's use the latest technology to print directly on to leather, producing colourful, clear, hi-resolution graphics, super rich in colour that are smooth, durable and will not peel or crack. Perri's DTL straps are also longer than the average guitar strap.

Read more less

If you have a Fender® guitar or re-issue from the 1950's-60's or 70's, this is your nut! A 7.25" radius, work with a curved or flat bottom and permanently lubricated for great tuning stability.  It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install. For just about all Fender® electric guitars made in the 1950’s, 60’ and 70’s… that’s a lot! The 7.25” fingerboard radius originated in the early 1950s and was used for most Fend® electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius.  MeasurementsLength: 43.18mm / 1.7"Width: 3.3mm / 0.13"Height: 5.41mm / 0.213"E to E: 35.31mm / 1.390" TUSQ XL is designed to boost guitar tone and performance. This precision engineered nut is made with a specially formulated material which couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note. It is based on the highly resonant TUSQ man made ivory, but is impregnated with PTFE to improve the tuning performance of the guitar.

Read more less

  The Guitar Cover is reversible with silver side/black side. Use with the silver side out when you need to protect your gear from the sun’s heat and UV rays. Use with the black side out when you need to protect your gear and obscure it from the crowd’s view. The cover fits acoustic, electric, and most bass guitars. Features:• Silver side protects gear from sun’s heat and UV rays• Black side protects equipment while obscuring gear from view from the audience• Guitar Cover material is water repellant• Material: Polyester with acrylic coating• Wipe clean with damp cloth

Read more less

Genuine replacement rear nut mounting screw for Floyd Rose Tremolo Systems. Made in Germany (set of 2).

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Looks simple right? Press a button and ping, they're done? Not so fast! First we laser cut and engrave them, from the finest tone-enhancing durable plastics, then carefully fill with gold paint before hand buffing and polishing each and every one with great enthusiasm. Now they're done.  Handmade in Brighton, UK.

Read more less

Cut from the finest tone enhancing plastic available then hand finished in Brighton, these tribute truss rod covers will make you and your guitar more attractive - but be warned! Fitting one may trigger envious looks from family, friends and fellow bandmembers.  Handmade in Brighton, UK.

Read more less

Cut from the finest tone enhancing plastic available then hand finished in Brighton, these tribute truss rod covers will make you and your guitar more attractive - but be warned! Fitting one may trigger envious looks from family, friends and fellow bandmembers.  Handmade in Brighton, UK.

Read more less

Cut from the finest tone enhancing plastic available then hand finished in Brighton, these tribute truss rod covers will make you and your guitar more attractive - but be warned! Fitting one may trigger envious looks from family, friends and fellow bandmembers.  Handmade in Brighton, UK.

Read more less

Formed from high grade, heat treated titanium, the Floyd Rose® FROTISLI21 titanium string lock insert blocks are the perfect upgrade for the Floyd Rose Special, 1000 Series or original double locking tremolo bridge systems. They are also compatible with CNC saddles that have a rounded front, or Floyd Rose bridges made in 2021 or later. Titanium itself, is as strong as high-strength steel, but 40% lighter and corrosion-free against acidic sweat and dirt, whilst increasing vibrato performance and resistance to any deforming or cracking when subjected to high compressive forces from string clamping. Fits Floyd Rose Original, 1000 Series, and Special tremolo systems.

Read more less

Cut from the finest tone enhancing plastic available then hand finished in Brighton, these tribute truss rod covers will make you and your guitar more attractive - but be warned! Fitting one may trigger envious looks from family, friends and fellow bandmembers.  Handmade in Brighton, UK.

Read more less

Protect your Xvive wireless system with an ultra-light, extra-hard carry case! Shockproof, Dustproof and Water Resistant. • Hard carry case for the U2 Guitar Wireless System• Three-layer EVA hardshell case• High-density oxford cloth exterior• Scratch-resistant, tear-resistant and waterproof• Custom foam insert designed for the U2 system• Includes interior pouch for USB charging cable SAFE AND SECUREXvive CU series carry cases are made of three-layer, extra-hard EVA, covered with an exterior of high-density oxford cloth. Wherever you go, your wireless system will be protected from drops, scratches, bumps and splashes!Inside the case, the custom foam inserts are designed to fit Xvive wireless systems perfectly, so your wireless units won’t rattle around during transport. ABLE TO CARRY CABLEXvive CU series cases all feature an interior zipper-sealed accessory compartment that is ideal for storing your USB charging cable.

Read more less

Protect your Xvive wireless system with an ultra-light, extra-hard carry case! Shockproof, Dustproof and Water Resistant. • Hard carry case for the U4 In-Ear Monitor Wireless System• Three-layer EVA hardshell case• High-density oxford cloth exterior• Scratch-resistant, tear-resistant and waterproof• Custom foam insert designed for the U4 system• Includes interior pouch for USB charging cable SAFE AND SECUREXvive CU series carry cases are made of three-layer, extra-hard EVA, covered with an exterior of high-density oxford cloth. Wherever you go, your wireless system will be protected from drops, scratches, bumps and splashes!Inside the case, the custom foam inserts are designed to fit Xvive wireless systems perfectly, so your wireless units won’t rattle around during transport. ABLE TO CARRY CABLEXvive CU series cases all feature an interior zipper-sealed accessory compartment that is ideal for storing your USB charging cable.

Read more less

Protect your Xvive wireless system with an ultra-light, extra-hard carry case! Shockproof, Dustproof and Water Resistant. • Hard carry case for the U4R2 In-Ear Monitor Wireless System (with two receivers)• Three-layer EVA hardshell case• High-density oxford cloth exterior• Scratch-resistant, tear-resistant and waterproof• Custom foam insert designed for the U4R2 system• Includes interior pouch for USB charging cable SAFE AND SECUREXvive CU series carry cases are made of three-layer, extra-hard EVA, covered with an exterior of high-density oxford cloth. Wherever you go, your wireless system will be protected from drops, scratches, bumps and splashes!Inside the case, the custom foam inserts are designed to fit Xvive wireless systems perfectly, so your wireless units won’t rattle around during transport. ABLE TO CARRY CABLEXvive CU series cases all feature an interior zipper-sealed accessory compartment that is ideal for storing your USB charging cable.

Read more less

Protect your Xvive wireless system with an ultra-light, extra-hard carry case! Shockproof, Dustproof and Water Resistant. • Hard carry case for the U4R4 In-Ear Monitor Wireless System (with four receivers)• Three-layer EVA hardshell case• High-density oxford cloth exterior• Scratch-resistant, tear-resistant and waterproof• Custom foam insert designed for the U4R4 system• Includes interior pouch for USB charging cable SAFE AND SECUREXvive CU series carry cases are made of three-layer, extra-hard EVA, covered with an exterior of high-density oxford cloth. Wherever you go, your wireless system will be protected from drops, scratches, bumps and splashes!Inside the case, the custom foam inserts are designed to fit Xvive wireless systems perfectly, so your wireless units won’t rattle around during transport. ABLE TO CARRY CABLEXvive CU series cases all feature an interior zipper-sealed accessory compartment that is ideal for storing your USB charging cable.

Read more less

This first ever expandable guitar pick snaps shut for a rock solid attack, and opens for improved flexibility with just one click. Simply pull down (or push back) the end of the pick to adjust the flex of the pick. Easily done with just your fingers, you can snap it shut for a rock solid feel or click it open for super flexibility. The Dava Click Pick boasts an original rubber grip, multi-gauge control and now, for the first time, instant adaptability between songs. • Rhythm to Lead in One Pick!• Non-slip Tractor Grip• Fantastic Tone Quality• Perfect for All Styles

Read more less

This first ever expandable guitar pick snaps shut for a rock solid attack, and opens for improved flexibility with just one click. Simply pull down (or push back) the end of the pick to adjust the flex of the pick. Easily done with just your fingers, you can snap it shut for a rock solid feel or click it open for super flexibility. The Dava Click Pick boasts an original rubber grip, multi-gauge control and now, for the first time, instant adaptability between songs. • Rhythm to Lead in One Pick!• Non-slip Tractor Grip• Fantastic Tone Quality• Perfect for All Styles

Read more less

Xvive’s best-selling, problem-solving U4 In-Ear Monitor Wireless System is now available as the XU4T9, a complete, self-contained package featuring everything required for extreme, high quality audio monitoring at home, in the studio or in a live stage environment.  This superb compact and highly portable wireless system includes the popular Xvive U4 6 channel Transmitter and Receiver, Xvive’s high-quality T9 In-Ear monitors with balanced drivers, deluxe CU Series travel cases and a host of accessories that account for a no-fuss, plug-in-and play system. Both the XU4’s transmitter and receiver are built to last, with a tough, robust plastic/metal construction. The receiver itself, with a sturdy metal belt clip, is unobtrusive with fiddle-free easily accessible Headphone Volume control and lockable Channel Select control.  The XU4T9 system is multi-functional, with the transmitter and receiver featuring 6 selectable channels for creating up to 6 individual discrete mixes or, by selecting the same channel as the transmitter, the same monitor signal can be sent to multiple receivers simultaneously.  With a balanced XLR input, the XU4’s transmitter also features Power/Mute, Aux/Line switches and status LEDs for Power, Channel Select and Battery life.    Charging for both units is via a standard USB port, from which the transmitter and receiver will each deliver up to 5 hours playing time, with a line of sight range of 90ft (27.5m) and, with a signal to noise ratio at 107 decibels, provides exceptionally clear and detailed reproduction audio at any volume within the operating 2.4Ghz frequency range, with a latency response of less than 5 milliseconds.  Accessories include, a male XLR to ¼ in jack adaptor, Micro-USB charging jack, USB ‘Y’ lead for charging the transmitter and receiver simultaneously, a cleaning tool and a large selection of silicone tipped ear-piece buds for the T9 In-Ear monitors to suit different ear canal sizes, offering individual comfort and a secure fit.  Available as a separate item the Xvive T9 In-Ear monitors, hand-made in the USA by IEM engineers, deliver pro-level audio quality with the finest details and, like the XU4T9 system, include a robust, lightweight CU Series hard shell travel case.  U4 Features• In-ear monitor wireless system for musicians.• 6 switchable channels allow parallel use of 6 systems. • Integrated rechargeable lithium battery transmitter (860 mAh) and receiver (1200mAh) for long battery life of more than 5 hours.• Y-USB Micro-USB charging cable for simultaneous charging of transmitter and receiver.• Range up to 90ft (without obstacles).• Less than 5 ms latency.• Frequency range  20 - 20,000 Hz.• 2.4 GHz ISM Band for world-wide use.• 24 bit / 48 kHz.• 107dB dynamic range & Signal-To-Noise Ratio.• Runs up to 5 hours per battery charge (2.5hr charge time for a full charge)• On/Off switch.• Channel switch.• Status LED show selected channel and indicates battery life.• Durable ABS and metal housing.• Micro-USB charging jack.• Line and Aux input mode on transmitter.• Receiver 1/8" output supports 6-600Ω Impedance headphones.• Includes U4 transmitter and receiver, T9 In-Ear Monitors, CU4 Travel Case and XLR Male to 1/4" TS Male Adapter. T9 Features• Dual balanced-armature drivers• Hand-assembled• Sound-isolating earphones• Both silicone and memory-foam ear tips included in three sizes• 3.5 mm earphone jack, compatible with all systems• Carrying case and cleaning tool included• Durable, replaceable cables• Custom-designed, unified crossover ensures that each driver is only sent frequencies they were designed to reproduce

Read more less

D'Andrea Celluloid Classic ~ .71mm ~ 12 picks

Read more less

D'Andrea Celluloid Classic ~ .96mm ~ 12 Picks.

Read more less

D'Andrea Classic Celluloid Assortment Kit ~ 432 picks

Read more less

D'Andrea Classic Celluloid Picks ~ Thin ~ 12 picks.

Read more less

D'Andrea Classic Celluloid Picks ~ .71mm ~ 12 picks.

Read more less

D'Andrea Classic Celluloid Picks ~ .96mm ~ 12 picks.

Read more less

D'Andrea 351 Designer Pearl Kit ~ 432 picks. Designer Pearl assortment of Red, White, Blue, Green, Purple, Black Pearl picks.

Read more less

D'Andrea 351 Designer Pearl Pick Kit Refill Bag ~ .71mm ~ 72 picks. Designer Pearl assortment of Red, White, Blue, Green, Purple, Black Pearl picks.

Read more less

D'Andrea 351 Designer Pearl Pick Kit Refill Bag ~ .96mm ~ 72 picks. Designer Pearl assortment of Red, White, Blue, Green, Purple, Black Pearl picks.

Read more less

D'Andrea 351 Designer Pearl Pick Kit Refill Bag ~ Thin ~ 72 picks. Designer Pearl assortment of Red, White, Blue, Green, Purple, Black Pearl picks.

Read more less

D'Andrea 351 Designer Pearl Pick Kit Refill Bag ~ .96mm ~ 12 picks. Designer Pearl assortment of Red, White, Blue, Green, Purple, Black Pearl picks.

Read more less

D'Andrea 351 Wild Celluloid Kit ~ 432 Picks. Wild Celluloid assortment of Cosmic Pearl, Rainbow, Checkerboard, Zebra Pearl, Multicolored Pearl, Jungle Camo picks.

Read more less

D'Andrea 351 Wild Celluloid Pick Kit Refill Bag ~.46mm ~ 72 Picks. Wild Celluloid assortment of Cosmic Pearl, Rainbow, Checkerboard, Zebra Pearl, Multicolored Pearl, Jungle Camo picks.

Read more less

D'Andrea 351 Wild Celluloid Pick Kit Refill Bag ~.71mm ~ 72 Picks. Wild Celluloid assortment of Cosmic Pearl, Rainbow, Checkerboard, Zebra Pearl, Multicolored Pearl, Jungle Camo picks.

Read more less